Това е програма за създаване на резервни образи на дялове и твърди дискове. Възможностите на програмата не са толкова много и липсват някои от възможностите, които са налични в платените програми от този род и някои други безплатни. Единствените екстри, в допълнение на възможността за създаване на образи, са възможността за отварянето им от Windows Explorer, компресията, спасителния диск и планирането за създаване на образи. За сметка на това пък интерфейсът на програмата е много приятен, а самата програма е доказано надеждна, стабилна и бърза.

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Промените можете да видите тук

Все още няма добавени промени

Все още няма добавени промени

Warning message in log for incomplete backup sets

• When creating an Incremental backup a warning message is now written to the log file if the backup set doesn't have all files in the backup target folder.

Spin up delay

• If the backup target folder cannot be located when running a backup then an automatic delay of 5 seconds is initiated before retrying to allow for disks spinning up from sleep.

• Linux CD major update. Linux Rescue CD now includes additional support for USB 3.0, restoring to RAID volumes and is built using the latest Linux 3.7 kernel.
  
• Windows Event log viewer - A Windows Event log viewer has been added to Macrium Reflect. VSS and other events can be view directly to assist in backup failure troubleshooting. To launch the viewer:
  1. Right click on the Macrium Reflect log tree node and select 'View Windows Events'.
  2. Take the 'Other Tasks' > 'View Windows Events' menu option.
  Note: Windows Events are now also appended to the VSS log file.

Bug fixes:

• Failed clone reported as success - If a disk read error occurred during a clone process then the clone could report success and terminate. This has been resolved and the appropriate error is now shown.
  
• Support tool hot key error - Launching the Macrium support tool with 'Ctrl+Shift+S' is no longer a system wide hot key.
  
• Scheduled task edit bug - Changing a task from 'Every Day' to 'n Number of Days' could cause the task to not reflect the change. This has been resolved.
  
• Windows PE build errorv - If Reflect was installed in a folder using characters outside the current code page then this could cause the Windows PE build to fail. This has been resolved.
  
• VSS Error with some DELL systems - Some DELL systems may assign the drive letter 'W' to the DELL system recovery partition. This could cause VSS snapshot VSS_E_INSUFFICIENT_STORAGE failures. This has been resolved.
  
• Allow dots in XML def file names - The dot character is now permitted in the xml file name.
  
• Windows PE UEFI media ignoring the prompt for key press option - The Windows PE rescue media for GPT/UEFI systems would always prompt for a key press on startup regardless of option selected when creating the media. This has been resolved.
  
• Logical drive image problem. - Incremental/Differential images of logical drives could create images of the wrong partition if another logical drive existed with exactly the same length in the same extended partition. This has been resolved.

• Improved restore and cloning speed
  Image restore and cloning functionality has been optimized to increase data throughput.
  
• Configurable transfer rate unit of measure
  The transfer rate unit of measure is now configurable between bits and bytes per second. Take 'Other Tasks' > 'Edit Defaults' > 'Advanced' > 'Advanced Backup Options' to change
  
• Installation by Order Reference
  It's now possible to enter your Order Reference and email address instead of license key when installing. If your order is for multiple licenses then the next available license key is installed. Prefix the order reference with 'ORD:' in the license key field.
  Bug fixes:
  
• Windows PE program error after restore completion
  Some customers experienced a program error after a successful restore in Windows PE. This did not affect the integrity of the restored file system. This has been resolved
  
• VSS Error with some DELL systems
  Some DELL systems will always assign drive letters 'X' and 'Y' to the DELL system recovery partitions. This could cause VSS snapshot VSS_E_INSUFFICIENT_STORAGE failures. This has been resolved
  
• Windows PE network support
  Network drivers that require files with a '.din' file extension could fail to load. This has been resolved
  
• Duplicate Disk ID causing wrong disk selection.
  If two disks on the system have the same disk ID, with one off-line, then the wrong disk could be selected for restore. This has been resolved

Все още няма добавени промени

• A new 'Pause' button has been added to the backup dialog. This will suspend the backup and all disk activity.
  
• The 'Verify' option in Macrium Reflect now has a check box to verify only the incremental or differential image selected. This increases the verification speed if the previous files in the backup set have already been verified.
  
• The logic for determining which file system clusters to include for Incremental and differential images has been optimized.
  
• On some systems the boot menu could fail to load drivers for Windows PE. If this has been a problem then step through the rescue media wizard to the final page and press 'Cancel'. This should resolve the problem

• Macrium Reflect now integrates with the Windows Assessment and Deployment Kit (ADK) for Windows PE 4.0 rescue environment creation.
  For more information on this, please see here: Win 8 ADK
  
• UEFI USB boot could fail if the USB flash device was not formatted FAT32. The media is now always formatted using FAT32 if UEFI boot is selected.
  
• For some customers, Reflect could crash when displaying the 'Rescue Media Drivers' page. This has been resolved.

• Now supports Windows XP, Vista, 7 & 8 multi boot. All configurations, including Windows installation on logical drives and system drive letters other than 'C'
  
• Some EFI system configurations caused a program crash when imaging 'All Windows' partitions. This has been resolved.

Все още няма добавени промени

• Release notes menu option
  Release notes menu option now added to the 'Help' menu for free edition users.
  
• Additional Install Option
  The full installer now has a separate option to install the Windows PE boot menu. Only applies to keys purchased with full Windows PE support (prior to Nov 2012).
  
• Update for UEFI systems
  Fix Boot Problems now handles multiple EFI partitions on multiple disks. You can now choose which disk to boot from and update the EFI Boot Configuration Data (BCD).
  
• Improved GPT disk and partition GUID handling
  For GPT full disk clones and restores. Now uses the same Disk GUID as source and maintains the same Partition GUID where possible.
  
• CD/DVD Engine Logging
  New troubleshooting option in the application defaults to log CD/DVD engine activities.
  
• 'Fix boot problems' error for EFI/GPT systems
  Update to resolve problem rebuilding the BCD when no drive 'C' can be found in Windows PE.
  
• 'Fix boot problems' error for Windows 8 systems
  Update to correctly identify Windows 8 partitions.
  
• Crash when loading disks
  If a Linux EXT2/3/4 file system has a volume label of 16 characters then this could cause a program error. This has been resolved.
  
• XP boot menu problem
  When uninstalling Reflect the boot menu could remain in Windows XP. This has been resolved.
  
• BitLocker encrypted drives crash
  Some customers have experienced a program error when loading BitLocker encrypted disks. This has been resolved.
  
• Crash when checking for updates
  The software could crash if the update checker received an invalid response from the update server. This has been resolved.
  
• Crash when cloning
  A program error could occur when cloning a GPT disk to non-GPT disk and non-standard data is found in track 0. This has been resolved.

• v5.1 of Macrium Reflect adds GPT disk support to the Free and Standard Editions. These editions now support the growing number of new systems that use the latest disk technology.
  
• Windows 8/Server 2012 Storage Pools can now be imaged and restored using the Reflect GUI.
  
• The download, installation and preparation of the Windows Automated Installation Kit (WAIK) has now been integrated into the rescue media wizard.
  
• The RAM usage during incremental and differential images and backups has been improved.
  
• Minor improvements and bug fixes. Please create a fresh rescue CD if you are using the Linux CD to restore images
  
• Some customers have reported backup failures when creating file and folder backups of files on Synology 212J NAS devices. This has been resolved.
  
• The imaging log could show an incorrect drive letters for dynamic volumes. This does not affect the integrity of the image. This has been resolved.
  
• File and folder backups with a virtual file system size > 2TB cannot be mounted in Windows Explorer and must be restored using the restore option in Reflect. A new error message prevents mounting the backup.

Все още няма добавени промени

• A new menu option has been added to view the release notes. Take the 'Help' > 'Release notes' menu option.
  
• The automatic log file purge option could leave some files behind. This has been resolved.
  
• File and folder filter options could be displayed incorrectly in the log. This has been resolved.

• Portable USB version of Macrium Reflect for technicians license customers. Please see the following Blog post for more information,
  
• Added support for forcing destination file name when matching image sets.
  
• Macrium Reflect now uses different icons for Image and File & Folder mounted backups, making it easier to distiniguish between the two.
  
• The Delete File Dialog would double the content of the file list each time the dialog was made visible. This has been resolved.
  
• A rare case existed where Dynamic Volumes, exceeding 6TB, on GPT initialised disks were not being shown in the Backup View. This has been resolved.
  
• When entering network share destinations in the 'Alternative locations' dialog it wasn't possible to proceed if the share was not currently available. This has been resolved.

Bug fixes: 5.0.4908:

• Restore and Clone geometry issue
  
• For some customers a restore or clone could result in a corrupt Master Boot Record. This has been resolved.
  
• IMPORTANT: Please create fresh Windows PE rescue media

Все още няма добавени промени

• Server Edition only: A failure message was not posted to the Windows Event log for some causes of image failure. This has been resolved.
  
• The Windows PE rescue CD/DVD could fail to boot on some systems. This has been resolved

Macrium Reflect now uses CD/DVD burning engine PrimoBurner 3.6. This has support for a greater range of hardware and resolves the rare issue of occasional hangs seen with the previous version.[/ist]
Bug fixes:

• Scheduled task display error
  
• Incremental and Differential backup jobs could incorrectly be shown as Full in the 'Scheduled Backups' tab. This has been resolved.

WAIK Time-zone

• Creation of WAIK based rescue media may not take the time-zone into account and image files could appear with the wrong time. This has been resolved.
  
• Uninstall Shell Registry Extensions
  
• When uninstalling, approved shell extensions would be removed. This has been resolved.
  
• Note: This fix applies to the removal of full installs of this version and later.

Installation Issue

• The Macrium Reflect installer would encounter issues on machines with no network adaptors. This has been resolved.

Linux Rescue CD Volume Names

• Linux Rescue CD could show the same volume label for all volumes. This has been resolved.

Menu Consistency

• Some menu items have been re-ordered for consistentency.

WinPE WAIK Taskbar

• The Taskbar under WAIK WinPE rescue media could occasionally not be visible. This has been resolved.

ReDeploy Active Service

• Macrium ReDeploy was not catering for some vendor active service settings. This has been resolved.

VSS Debug Logging

• Enhanced VSS debug logging was not present even if selected in the Advanced Properties. This has been resolved.

File & Folder Search Cancel

• Cancelling or stopping a File & Folder Search for restore could cause Reflect to hang in certain circumstances. This has been resolved.

Rescue Media Creation

• The creation of rescue media was not catering for edge cases of linking USB root hubs to USB3 host controllers. This has been resolved.

PE Explorer

• PE Explorer, location toolbar lost on escape keypress in location editbox. This has been resolved

Restore UI

• Image and backup files could remain in the list of files even if the folder was removed from the search list. This has been resolved

Rescue media Wizard

• The horizontal scrollbar was missing from the Rescue Wizard drivers page device list. This has been resolved

Коригирани грешки:

• Startup Issue. Macrium Reflect could hang at startup if the file system contained an NTFS MFT record with a attribute list > 64K in size. This has been resolved.
  
• File & Folder Search. When cancelling a File and Folder search operation for restore, Macrium Reflect could generate a dump report. This has been resolved.
  
• Licensing. When contacting the license server, Macrium Reflect could crash on button clicks. This has been resolved.
  Email Attachment Images. Success/fail graphics were omitted from email log attachments. This has been resolved.
  
• Toolbar/Status bar State. The state of the toolbars and status bar were not being saved between runs of Macrium Reflect. This has been resolved.
  
• Installer issue. In rare cases, during an upgrade from existing v4 install, the Image Mounting service would prevent the install from completing. This has been resolved.
  
• Fix Boot Problems Issue. An edge case where the Fix Boot Problems option under WinPE could reboot the machine when manually specifying an operating system path. This has been resolved.

Bug fixes:

• When updating Reflect, if the installer is used instead of the normal patch procedure, email settings will be lost. This has been resolved.
  
• Byte order marker being rendered in emailed log attachments in some email clients. This has been resolved.
  
• In some Vista/Win7 installs omaging to DVD could cause an 'Invalid (not writeable)' error. This has been resolved.
  
• VSS snapshot creation could fail if a VSS writer component is configured to use a volume that no-longer exists on the system. This has been resolved.
  
• Restore with auto reboot into the rescue environment could fail if the local drives were re-sequenced by Windows PE. This has been resolved.
  
• Hitting escape after clicking the taskbar may result in it being hidden. This has been resolved.
  
• The list of existing images was not always populated when booted into WinPE recovery. This has been resolved.
  
• An issue where the NTFS permissions setting in full backups was not being honoured in incremental backups. This has been resolved.

Нововъведения:

• Windows 8 Consumer Previewл Macrium Reflect is now fully compatible with Windows 8 Consumer Preview

Коригирани грешки:

• IMPORTANT: ReDeploy Device Database Improvements. Users of the Pro and Server Editions of software who make use of ReDeploy are advised to create new rescue mediaThis is due to enhancements and additions to the ReDeploy device database
  
• Splash Screen. The Splash screen was momentarily shown during scheduled task startup. This has been resolved.
  
• ReDeploy and RAID Systems. A ReDeploy issue was reported where certain RAID Controllers would not be correctly catered for. This has been resolved.
  
• Delete XML Definition Files. If the XML View tab was selected and an XML file was deleted from the list then a 'Page cannot be found' error was displayed. This has been resolved
  
• Email Logs. When emailing logs using the right click menu option on the Logs tab, users were unable to enter paragraphs into the email body text. This has been resolved

Нововъведения:

• Scheduled Task Postpone. Scheduled backup tasks now present a postpone option if the backup notification delay has been set in the Defaults

Коригирани грешки:

• Definition Filename Issue. A scheduled task may not run if the path or the xml file name contained '-full', '-inc' or '-diff'. This has been resolved.
  
• Free Edition Fix Boot Problems. The Fix Boot Problems option may not work on 32 bit based rescue systems, this only affected Free Edition customers only. This has been resolved.
  
• UEFI Rescue Media Creation. The creation of rescue media on UEFI systems would, on some motherboards, fail to create valid media. This has been resolved.
  
• Network Logon Defaults. An issue where a configured network logon default would not match correctly with an XML definition was raised. This has been resolved.
  
• Rescue Media Drivers. An issue where certain Perc RAID controllers were not being correctly handled for Server 2003 and SBS 2003 was raised. This has been resolved.
  
• DVD Backup Verify. An issue where setting backup verification and using DVD media as the target would cause the optical drive tray to be ejected prior to the verify causing the verify to fail. This has been resolved.
  
• UEFI Recovery Boot Menu Option. An issue where the recovery boot menu option failed to be set for some UEFI systems on install. This has been resolved.
  
• Recovery Boot Menu. Pressing the 'OK' button twice when adding the Windows PE boot menu option could cause multiple boot menu entries. This has been resolved.
  
• Browse For Folders. If Windows Explorer was set to hide system and hidden files then system and hidden files were also excluded from the browse dialogs in Macrium Reflect. This has been resolved.
  
• Rescue Media USB3 Root Hub Detection. Some USB3 root hubs were not being correctly matched during the rescue media creation process. This has been resolved.
  
• WinPE Boot Process. During the WinPE boot process some USB devices would not be detected or have drivers loaded due to being uninitialized. This has been resolved.
  
• Fix Boot Problems. Running Fix Boot Problems would render the bootmgr file to become visible and thereby accessible to standard user accounts. This has been resolved

Коригирани грешки:

• Rescue Wizard Driver Copy A rare case where a security catalog was not being copied for a driver in the rescue media. This has been resolved.
  
• Custom File names When using custom files names, the file name could have a '1' unnecessarily appended to the end to ensure uniqueness. This was caused by DSM purge and file name generation sequence. This has been resolved.
  
• Rescue CD WAIK Files Issue when creating the standard WinPE rescue CD. Was copying the WAIKFiles folder if present. This has been resolved.
  
• Dynamic Disk Restores The restore process was updating the BCD if the target disk was dynamic. This has been resolved.
  
• TextEdit in WinPE TextEdit in WinPE was not correctly handling UTF8 and UTF16 based text files. This has been resolved.
  
• PEExplorer in WinPE The 'Del' key in the directory path edit control of Windows PE Explorer would not delete characters in the directory path. This has been resolved.
  
• x64 WAIK Rescue Media Creation The driver copy function for the 64 bit WAIK based Windows PE rescue CD could fail if the standard Windows PE component was installed. This has been resolved.
  
• Dynamic Disks Fix Boot Problems The Windows PE function "Fix Boot Problems" may fail to work for system that boot into a dynamic disk. This has been resolved.
  
• WinPE Dynamic Disk/Volume Imaging If a dynamic disk/volume was imaged while running Windows PE the image may fail with error 'Access Denied'. This has been resolved.

Нововъведения:

• Windows Home Server Macrium Reflect Standard and Professional Editions now fully support Windows Home Server platform
  
• File And Folder Backup - folder filter mask specification improvements The file and folder filter has been improved to include the full path when matching. The previous filter methods are still valid.
  
• Free installer registration details The Macrium Reflect Free Edition installer now allows for the modification of existing registration details.
  
• Improved USB3 device detection Macrium Reflect has been extended to take advantage of more USB3 controllers and hubs

Коригирани грешки:

• Alternate Locations hint text After adding a folder as an alternate backup location, clicking into the folder edit box caused the hint text to not be selected. This has been resolved.
  
• Time remaining countdown An infrequent issue was raised where the time remaining at the end of a backup was being misreported as 1 second. This has been resolved.
  
• Autocomplete edit box visible during backup Pressing any key during a backup process would result, incorrectly, in the locations autocomplete edit box to become visible. This has been resolved.
  
• Installer Return button The button on the 'License Already Installed' error dialog was Cancel and should have been OK and Cancel. This has been resolved.
  
• Interactive backup auto shutdown Automatic shutdown of interactive backups would not initiate as Macrium Reflect was still running. This has been resolved.
  
• Rescue media USB device selection When creating a rescue environment to USB pen drive media, it was possible to select a blank USB device from the list. This has been resolved.
  
• Scheduled task deletion confirmation Macrium Reflect was not prompting the user for confirmation of scheduled task deletion. This has been resolved.
  
• Rescue media device detection When creating the rescue environment, Macrium Reflect could include devices that were not relavant to the WinPE environment. This has been resolved.
  
• Rescue media update driver Macrium Reflect would allow the user to specify (or search) the Windows\Inf folder for drivers, which can lead to incorrect or unsupported drivers being included in the rescue media. This has been resolved.
  
• WinPE Unsupported Devices dialog The Unsupported Devices dialog in WinPE was displaying devices which were unrelated to the process of backup/restore. This has been resolved.

Все още няма добавени промени

Все още няма добавени промени

• Linux rescue CD update.
  Improved Linux CD restore performance and compatibility
  
• Automatic conversion from MBR to GPT.
  Pro and Server editions. If an MBR partition is restored to an empty disk and expanded to > 2TB in size then the target disk is now automatically converted to GPT to accommodate the new partition size.
  
• Bug fixes:
  Installer update issue.
  When upgrading using the Macrium Reflect installer, if the current installation was not on drive 'C' then the upgrade would not install to the same path as the existing installation. This has been resolved.
  
• Restore defaults.
  The global default setting 'Restore MBR' was not honoured when restoring a disk image. This has been resolved.
  
• Image file deletion error.
  If an image file that was split (e.g, into 4GB chunks due to FAT32) and was deleted using the Reflect GUI, this could cause a program crash. This has been resolved.
  
• XML validation error.
  Disks numbered > 9 could cause an XML validation error. This has been resolved.
  
• Windows PE (WAIK) download retry.
  If the WAIK download timed out then subsequent retries could time-out at the same point during the retry. This has been resolved.
  
• Linux rescue CD disk matching
  When restoring with the Linux rescue CD the incorrect disk could be defaulted for the restore process. This occurred for a a very specific sequence of disks and disk signatures and has been resolved.
  

Нововъведения:

• Network authentication. Improved network authentication reliability in application defaults
  
• INF file parser improvements. Improved INF file parser to support QLogic fibre channel controllers

Коригирани грешки:

• IMPORTANT: v5 Free Edition WinPE WAIK bug. Some users of the free edition WAIK rescue CD found that booting resulted in Macrium Reflect not being loaded correctly. This issue has now been resolved. If this issue has affected you, please update Macrium Reflect and create a fresh WAIK resue CD

Коригирани грешки:

• Error saving XML file to a path with non ANSI characters. The XML file save would fail if the destination path contained non ANSI characters. This could cause a problem where accented or non western characters were used. This has been resolved. Please burn a fresh rescue CD if this affects your saved files.
  
• Backup notifications and logs for XML validation errors. If a backup definition (XML) file failed validation then no email or error log was produced. This has been resolved.
  
• Screen power management disabled during backup. Macrium Reflect will now honour screen power management settings during a backup.
  
• Netbook screen size issue. The 'Image all local disks' dialog vertical height was too large for some netbook PCs. This has been resolved.
  
• Alternative backup locations error. When multiple backup locations were used, the Disk Space Management purge logic was not executed and only full images and backups would be created. This has been resolved.

Нововъведения:

• Added unattended restore for the Windows Automated Installation Kit (WAIK).
  
• Customers using the MS WAIK to create a Windows PE rescue CD can now initiate an unattended restore.
  
• New option to remove user files on uninstall.
  
• The uninstaller now gives the option to remove all user files, not including images or backup files, during application removal. In the Control Panel take the 'Modify' then 'Remove' for this option.
  
• Increased the total number of supported attached local disks to 40.
  
• Macrium Reflect now supports up to 40 attached local disks for image and restore.
  
• Improved drive letter allocation logic when restoring.
  
• If drag and drop is used for restoring to a different partition, the drive letter of the partition being replaced is used for the newly restored partition by default.
  
• Additional logging for driver injection.
  
• A file is now created 'media_drivers.log' in the Macrium Program data folder that logs the auto driver injection process for Windows PE.
  
• USB rescue media enhancements.
  
• Support for a wider range of USB flash media types.

Коригирани грешки:

• 'Disable VSS Writers' option not available.
  
• This option in the default properties was greyed out for Server 2003. This has now been enabled.
  
• Error in test email message box text.
  
• Reported as being sent to the 'sender' not the 'recipient'. This has been resolved .
  
• Server SBS 2011 Widows Event log issues.
  
• The channel used to report Macrium Reflect event logs has been renamed to avoid a conflict with MS Exchange.
  
• Error in image path name during restore.
  
• If the path to an image file had multiple consecutive spaces this could cause the restore process to be unable to locate the image file. This has been resolved.
  
• Linux Rescue CD image date error.

• Progress bar error when imaging partitions > 3TB - The backup progress bar would prematurely show 100% complete when imaging disks > 3TB in size. This has been resolved.